Jayesh Traders
Yamuna Vihar New Delhi, Delhi
GST No. 07ANFPA0867R1ZN
Call 0804386308960% Response Rate
Send Enquiry
CO2 Sensors And Meters
Portable CO2 Meter
Product Brochure
| Minimum Order Quantity | 1 Piece |
| CO2 range | 0-5000 ppm |
| Meter type | Handheld |
| Measured parameters | CO2 |
| Brand | Airatom |
| Sensor type | MOS sensor |
| Display type | LCD |
| Output interface | USB |
| Weight | 195 Gram |
| Model Name/Number | AA-GAS-79 |
| Material | ABS Plastic |
All new AA-GAS-79 Air Quality Monitor from AIRATOM is an highly accurate & Reliable Air Quality Monitor uses Industrial Grade Sensors.
Features:
Defferentiates 23 Types of gases.
High quality numeric LCD Display.
Display concentration in PPM.
Environment assesment indicator.
Unique design, Detects CO2 Levels in 60 seconds.
Instrument details introduction :
Quantity of electricity.
HCHO average value in 60 minutes.
TVOC
HCHO average value in 30 minutes.
CO2 average value in 10 minutes.
Real-time environmental assessment.
Press the button 5 times to switch language.
Hold detection values.
Hold down key 3s to calibration instrument.
Hold down key 3s to switch the detector.
Keep it ventilated.
Why choose Airatom:
Premium Quality :
Airatom Air Quality Monitors use only high quality materil, for 100% customer satisfaction guaranteed.
CE certified parts.
Industrial grade sensors.
No service required.
OLED Display :
Brightest and long life organic light emitting diode display.
High Quality Sensor:
CE certfied accurate & reliable industrial grade gas sensors AQI according to detected gas concentration levels.
Monitor TVOC, HCHO, CO2 Levels.
Measures 23 different gases.
Industrial Grade Sensors Use.
Highly Accurate & Reliable.
Econo Mode
Econo mode ensures minimum power consumption during long running hours.
View Complete details
Adafruit SCD-40 and SCD-41
Product Brochure
| Minimum Order Quantity | 1 Piece |
| Measurement Range | 10000 PPM |
| Operating Voltage | 5V |
| Brand | sensirion |
| Output Current ( in mA) | 5v |
| Warranty | 1 year |
| Dimensions | 2'2 |
| Usage/ Application | industrious, office |
| Detection Principle | NDIR |
| Operating Humidity | 50 |
| Country of Origin | Made in India |
The Adafruit SCD-40 and SCD-41 are next-generation NDIR CO₂ sensor modules that deliver precise and real-time measurements of CO₂, temperature, and humidity. Engineered with ultra-low power consumption and compact design, these sensors are ideal for air quality monitoring, pollution control, and environmental management. With fast response and long-term stability, they integrate seamlessly with IoT systems, BMS automation, and smart city solutions. Perfect for indoor air quality applications, including HVAC systems, schools, offices, greenhouses, and industrial environments, the SCD-40 and SCD-41 meet ISO9001 and CE standards, ensuring government compliance and delivering reliable data for healthier air.
View Complete details
Analog Output Co2 Sensor
Product Brochure
| Minimum Order Quantity | 2 Piece |
| Measurement Range | 10000 PPM |
| Operating Voltage | 24V |
| Output Current ( in mA) | 4-20 mA |
| Brand | AIRATOM |
| Warranty | 1 year |
| Usage/ Application | Office, Commercial Building, etc. |
| Country of Origin | Made in India |
| Packaging Type | Hard Card Box |
| Product Type | CO2 Sensor |
| MountingType | Wall Mounted |
We are engaged in offering Analog Output Co2 Sensor to our clients. Our range of all products is widely appreciated by our clients.
CO2 concentration - 400-5000PPM
Out put signal - 4-20ma analog output
Operating voltage - 24v DC power supply.
Precision - +-40PPM
View Complete details
Analog Output Co2 Sensors
Product Brochure
| Minimum Order Quantity | 2 Piece |
| Brand | AIRATOM |
| Sensor type | NDIR |
| Output signal | Modbus |
| Mounting | Wall mount |
| Supply voltage | 5 V DC |
| With temp sensor | No |
| No. of Input Channel | 4 |
| Target gases | co2 |
| Model Name/Number | AA-co2-analog |
| Power | 24V DC |
Out put signal - 4-20ma analog output
Operating voltage - 24v DC power supply.
Precision - +-40PPM
View Complete details
Rotronic CO2 Monitoring Meter
Product Brochure
| Minimum Order Quantity | 1 Piece |
| CO2 range | 0-5000 ppm |
| Meter type | Handheld |
| Measured parameters | CO2 |
| Sensor type | NDIR |
| Display | LCD |
| Display type | LCD |
| Output interface | USB |
| Measuring Range | 0-5000PPM |
| Weight | 500g |
| Brand | Rotronic |
Specifications:
| Humidity sensor | ROTRONIC HYGROMER® IN-1 |
|---|---|
| Temperature sensor | Thermistor |
| Long-term stability | < 1.5 %RH per year |
| Measuring range | 0…5000 ppm, 0.1...99.95 %RH, -20...60 °C |
| Accuracy at 23 ±5 °C | ±30 ppm ±5 % of the measured value, ±2 %rF (10...90 %rF), others ± 5 %rF, ±0,3 K |
| Response time t 63 | <30 s, without filter |
| Alarm functions | Adjustable for CO2 measurement |
| Dimensions | 76,7 x 41,8 x 233,9 mm |
| IP protection rating | IP30 |
| Weight | 290 g |
| Housing | ABS |
| Parameters shown | CO2, relative humidity and temperature |
| Calculations | Dew point, wet bulb temperature |
| Clock | Real time clock |
| Current consumption | 40 mA (typical) |
| CE / EMC conform | 2004/108/EC |
| Power supply | 4 x AA batteries / optional AC adapter AC1214 |
| Battery lifetime | 50 h |
| Measured value memory | 18,000 values with time stamp, automatic recording (%RH / °C / ppm), 99 single values with time stamp, manual recording, (%RH / °C / DP / Tw / ppm) |
| Measurement principle | Non dispersive infrared (NDIR) with automatic baseline correction (ABC) |
| Response time | <10 sec @ 30 cc/min. flow, <3 min diffusion time |
| Adjustment points | 0, 400 ppm and 35, 80 %RH |
| Pressure dependence | +1.6 % reading per kPa |
| Zero drift | <10 ppm/year |
| Maintenance | No maintenance (standard indoor application) |
| Warm-up time | <1 min. |
View Complete details
carbon dioxide Co2 Sensor
| Minimum Order Quantity | 1 Piece |
| Measurement Range | 10000 PPM |
| Gas type | CO2 |
| Sensor type | NDIR |
| Output signal | UART |
| Mounting | PCB mount |
| Supply voltage | 5 V DC |
| Model | ds-co2-20 |
| Ingress rating | IP65 |
| Display type | No display |
| Name of Gases Detected | co2 |
MH-Z19E NDIR infrared gas module is a common type, small size sensor, pins type or terminal type, using non-dispersive infrared (NDIR) principle to detect the existence of CO2 in the air, with good selectivity, non-oxygen dependent and long life. Built-in temperature compensation; and it has UART output and PWM output. It is developed by the tight integration of mature infrared absorbing gas detection technology, precision optical circuit design and superior circuit design.
Applications:
- HVAC refrigeration
- Air cleaner device
- Indoor air quality monitoring
- Smart home
- Ventilation system
- School
View Complete details
Esense Co2 Sensor
Product Brochure
| Minimum Order Quantity | 1 Piece |
| Measurement Range | 10000 PPM |
| Measuring Range | 0-10000 |
| Target gases | co2 |
| Operating Voltage | 24V |
| Brand | esense |
| Output Current ( in mA) | 4-20 |
| Warranty | 1 |
| Usage/ Application | co2 measurement |
| Detection Principle | NDIR |
| Response Time | <3sec |
Measurement range CO2 0 to 10,000 ppm vol
Accuracy ±30 ppm ±3% of reading
Dimensions 100 mm x 80 mm x 28 mm
Maintenance No maintenance required*
Life Expectancy > 15 years
Operation temperature range 0 to 50°C
Operation humidity range 0 to 95% RH (non-condensing)
Power supply 24 VAC/VDC Response time(T1/e) 2 min.
diffusion time Communication Uart ( Modbus)
Outputs OUT1 linear output 0 to 10 V DC (CO2)
OUT2 linear output 2 to 10 V DC or 4
View Complete details
Co2 Sensor
Product Brochure
| Minimum Order Quantity | 1 Piece |
| Measurement Range | 20000 PPM |
| Operating Voltage | 5V |
| Brand | Sense air |
| Output Current ( in mA) | 4-20 |
| Warranty | 1 year |
| Dimensions | 3cm |
| Usage/ Application | cold room/agriculture/building/hvac |
| Detection Principle | NDIR principle |
| Operating Humidity | 90 |
| Country of Origin | Made in India |
| Article number | 004-0-0053 |
| Operating principle | Non-dispersive infrared (NDIR) |
| Measured gas | CO₂ |
| Measurement range | 400–10 000ppm |
| Accuracy | ±40 ppm ±3% of reading |
| Operating range RH | <85 % RH |
| Operation range °C | <50 °C |
| Warm-up time | <60s |
| Response time | ≤30s |
| Power supply | 4.5 - 5.25 V |
| Peak current | 300 mA |
| Average current | 18mA |
| Communication | Modbus protocol, UART |
| Outputs | Digital |
| Compliance | ANSI/ASHRAE 62.1-2022 RESET grade B WELL v2™ |
| Maintenance | Maintenance free |
| Life expectancy | >15 years |
| Dimensions | 33.9 x 19.8 x 8.7 mm (L x W x H) |
| Weight | 8 g |
| Storage conditions | -40–70 °C |
View Complete details
Co2 Volume Sensor - Cold Drinks , Soda Beer Bottles
| Minimum Order Quantity | 1 Piece |
| Target gases | CO2 |
| Brand | airatom |
| Measuring Range | 9Mpa |
| Output Current ( in mA) | N/A |
| Warranty | N/A |
| Usage/ Application | Cold drinks, beer bottles |
CO2 sensors are devices that measure the concentration of carbon dioxide in the air. They are used in various settings like homes, offices, industries, and even in vehicles to monitor indoor air quality, ensure safety, and regulate ventilation systems. These sensors work by detecting the presence of CO2 through various technologies such as non-dispersive infrared (NDIR) sensors, metal oxide semiconductor sensors, and electrochemical sensors.
View Complete details
EXPLORE MORE CATEGORIES
